Looking for Answers about Dynex™ 32" Class / 720p / 60Hz / LCD HDTV?
Customer Questions & Answers for
Dynex™ 32" Class / 720p / 60Hz / LCD HDTV
This 32" HDTV features a crisp 1366 x 768 resolution for a cinema-style viewing experience and 3 HDMI inputs that create flexible connectivity options so you can enjoy your favorite movies, games and TV shows in stunning high-definition.
Customer Questions & Answers:
72 Questions
| 91 Answers
Overall Rating:
Questions & Answers for Dynex™ 32" Class / 720p / 60Hz / LCD HDTV
Question
What size screws attach the stand column to the back of the TV
Going from wall mount back to using a stand. "Align the holes in the stand with the holes in the stand column, then secure the stand to the column with the four screws provided." -- what size and length screws were provided?
2 years, 8 months ago
on Dynex™ 32" Class / 720p / 60Hz / LCD HDTV
by
Posted by:
Anonymous
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Use four M5 screws (metric). You can buy them at any hardware store like Lowe's or Home Depot. Length is unknown, you can buy a few sizes like 12mm, 18mm or 24mm long and take back the ones that won't fit (too long)
2 years, 7 months ago
by
Posted by:
Pops91710
from
Chino, California
0points
0out of 0found this answer helpful.
Question
How do you activate Closed Captioning?
I have a set top cable box connected as Component 1. When I follow the instructions in the online User Guide, and go to the Setup screen, the Closed Caption item is grayed out and will not respond.
2 years, 8 months ago
on Dynex™ 32" Class / 720p / 60Hz / LCD HDTV
by
Posted by:
Bob
from
NH
+1point
1out of 1found this question helpful.
2 answers
Answers
answer 1
Sounds like an STB problem, not the TV.
2 years, 7 months ago
by
Posted by:
Pops91710
from
Chino, California
-1point
0out of 1found this answer helpful.
answer 2
Some channels do not have CC encoding and the cable box may need to be set CC on or pass through.
2 years, 8 months ago
by
Posted by:
KellyH
from
Alamogordo, NM
-1point
0out of 1found this answer helpful.
Question
Volume very low on headphones to speakers
Replacing TV in motorhome, Motorhome has external speakers that plug into the headphone jack of old TV, when I plug the speakers into the headphone jack of the new Dynex I can barely hear with TV volume at 100. Worked fine with old TV
2 years, 8 months ago
on Dynex™ 32" Class / 720p / 60Hz / LCD HDTV
by
Posted by:
HAL
from
Havana, Fl
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
You must have replaced an older set. Some sets today limit the volume output on headphones. Also the power is only enough for headphones, and won't drive the heavier speakers. You will need to use a speaker system especially designed for PC's or iPods and have internal amplifiers. This means they will need to plug into a 120V source of power. Best Buy sells the Bose Companion speakers for PC's.($99 and up) I have both the Bose and Klipsch, but the Klipsch sound system is mind bogglingly awesome. ($154), and well worth the extra 56 bucks.
2 years, 7 months ago
by
Posted by:
Pops91710
from
Chino, California
0points
0out of 0found this answer helpful.
answer 2
The headphone jack provides a very low wattage, more than enough for regular headphones, but not enough for speakers. Although they use the same connection type, when trying to use speakers for this particular output, you will need the signal to be boosted by an amplifier (external or built in).
2 years, 8 months ago
by
Posted by:
JohnDYNEX
0points
0out of 0found this answer helpful.
Question
Are the TV's VESA compliant?
2 years, 8 months ago
on Dynex™ 32" Class / 720p / 60Hz / LCD HDTV
by
Posted by:
Anonymous
-1point
0out of 1found this question helpful.
2 answers
Answers
answer 1
VESA (Video Electronics Standards Association), is an international standards body for computer graphics founded in 1989 by NEC Home Electronics and eight other video display adapter manufacturers.
VESA's initial goal was to produce a standard for 800×600 SVGA resolution video displays. Since then VESA has issued a number of standards, mostly relating to the function of video peripherals in personal computers.
VESA works to develop industry-wide interface standards for a large variety of products including Flat Panel TVs and monitors.
Television manufacturers that build their sets to interface with a PC as a computer monitor do so in accordance with the VESA association. If it has a PC input, it is VESA compliant.
VESA's initial goal was to produce a standard for 800×600 SVGA resolution video displays. Since then VESA has issued a number of standards, mostly relating to the function of video peripherals in personal computers.
VESA works to develop industry-wide interface standards for a large variety of products including Flat Panel TVs and monitors.
Television manufacturers that build their sets to interface with a PC as a computer monitor do so in accordance with the VESA association. If it has a PC input, it is VESA compliant.
2 years, 7 months ago
by
Posted by:
Pops91710
from
Chino, California
-1point
0out of 1found this answer helpful.
answer 2
Pretty much any LCD can be VESA. There is a formula for measuring and calculating VESA info online.
2 years, 8 months ago
by
Posted by:
KellyH
from
Alamogordo, NM
-1point
0out of 1found this answer helpful.
Question
what size are the screws that mount in the back
2 years, 9 months ago
on Dynex™ 32" Class / 720p / 60Hz / LCD HDTV
by
Posted by:
Anonymous
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
According to the TV manual, the wall mount bracket uses four M6 screws that come with the bracket, not the TV.
2 years, 7 months ago
by
Posted by:
Pops91710
from
Chino, California
0points
0out of 0found this answer helpful.
answer 2
If you're mounting your television to a wall, you'd need 4 of the M6 screw size. If it's being mounted to the stand, you'd need 4 of the M5 screw size.
2 years, 9 months ago
by
Posted by:
JustinDynex
+1point
1out of 1found this answer helpful.
Question
Installing TV on back porch.
We have a covered back porch. We live in Central Texas and we get temperature variations from +110F to +10F. I wanted to know if I can install this hdtv on my back porch w/o any worries due to temperature extremes. I have used on old style tv on the back porch for 6+ years with no issues, but never an HDTV.
2 years, 8 months ago
on Dynex™ 32" Class / 720p / 60Hz / LCD HDTV
by
Posted by:
terry
from
bcs
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Below 50 degrees the picture quality will be impaired as the liquid crystals are slower to react. It might shorten the LCD life.
2 years, 7 months ago
by
Posted by:
Pops91710
from
Chino, California
0points
0out of 0found this answer helpful.
answer 2
The operating conditions for our LCD TVs (according to the manual's specs) are:
Temperature: 41°F - 95°F
Humidity: 20% - 80% RH
Atmospheric pressure: 86 KPa - 106 KPa
It is not recommended to operate the TV outside these values.
Temperature: 41°F - 95°F
Humidity: 20% - 80% RH
Atmospheric pressure: 86 KPa - 106 KPa
It is not recommended to operate the TV outside these values.
2 years, 8 months ago
by
Posted by:
JohnDYNEX
0points
0out of 0found this answer helpful.
Question
Dynex Remote
Our remote skips channels if we use the channel up/down button. If we punch the channel number in, the channels show. How can we fix the remote so the channel up/down works?
2 years, 9 months ago
on Dynex™ 32" Class / 720p / 60Hz / LCD HDTV
by
Posted by:
Anonymous
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Sounds like a warranty issue. If out of warranty, just buy a universal remote. If it is a TV issue, then a warranty service is a must.
2 years, 7 months ago
by
Posted by:
Pops91710
from
Chino, California
0points
0out of 0found this answer helpful.
answer 2
If you believe the remote control is responsible for the problem, remove the batteries, press all of the buttons and install fresh batteries. This resolves most remote control issues. Otherwise, try resetting the TV to factory defaults and performing a new channel scan.
2 years, 9 months ago
by
Posted by:
JohnDYNEX
0points
0out of 0found this answer helpful.
Question
Product Registration
How do I register my new Dynex TV's?
2 years, 9 months ago
on Dynex™ 32" Class / 720p / 60Hz / LCD HDTV
by
Posted by:
Anonymous
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Save the receipt. If you used a BB card, you are on the data base.
2 years, 7 months ago
by
Posted by:
Pops91710
from
Chino, California
0points
0out of 0found this answer helpful.
Question
warranty information
where is warranty info located
2 years, 9 months ago
on Dynex™ 32" Class / 720p / 60Hz / LCD HDTV
by
Posted by:
Anonymous
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
http://www.dynexproducts.com/home.html The set has a one year limited warranty.
2 years, 7 months ago
by
Posted by:
Pops91710
from
Chino, California
0points
0out of 0found this answer helpful.
answer 2
You can go online to http://www.dynexproducts.com/ and type in your model information in the search field to bring up a downloadable version. Otherwise you may click here:
http://www.dynexproducts.com/cms/do...
http://www.dynexproducts.com/cms/do...
2 years, 9 months ago
by
Posted by:
JustinDynex
0points
0out of 0found this answer helpful.
Question
HOW DO I SET THE DX-32L150A11 TO STEREO?
2 years, 9 months ago
on Dynex™ 32" Class / 720p / 60Hz / LCD HDTV
by
Posted by:
Anonymous
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Press the MTS/SAP button on the remote. Then select Stereo.
2 years, 7 months ago
by
Posted by:
Pops91710
from
Chino, California
0points
0out of 0found this answer helpful.
answer 2
Press MTS/SAP on the remote control one or more times for the on screen menu and select Stereo. Alternatively, press MENU on the remote control and select Audio. From there you may make any needed adjustments to your TV's sound output. More details can be found in the owner's manual.
2 years, 9 months ago
by
Posted by:
JohnDYNEX
+2points
2out of 2found this answer helpful.