Hi Anne- This is Sue at GE Appliances. We certainly appreciate your loyalty! A comparable model is our GE PROFILE™ SERIES 2.2 CU. FT. COUNTERTOP MICROWAVE OVEN PEB7226DFBB. You will also need OPTIONAL 30" BUILT-IN TRIM KIT JX7230DFBB or OPTIONAL 27" BUILT-IN TRIM KIT JX7227DFBB. The only difference between the 27" and 30" trim kit is the trim frame. If the microwave is installed over a 27" or 30" wall oven, be sure to match the trim kit width to the oven. We encourage you to view the Installation Instructions for cutout and clearance requirements at the following link (page 2): https://www.myapstore.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40727.pdf - Keep in touch!

Hello Robin - this is Nancy at GE Appliances and we are happy to help you. This 2.2 cubic foot microwave is very roomy with interior cavity dimensions of 17" wide x 11-5/8" high x 18-7/8" deep. The turntable is 16" in diameter. We hope this helps! Thanks for checking with us!

Hello johnniern - this is Nancy at GE Appliances and we are happy to help you. The internal cavity dimensions of this microwave are: 17" wide x 11-5/8" high x 18-7/8" deep. This microwave does have a light. It is located within the inside walls of the microwave oven so it is not consumer replaceable. Thanks for checking with us! We're glad you asked!

Hi Tallyboy,
I am happy to help. It sounds like you might need an over the range microwave.
We no longer manufacture the 36 inch wide unit, but our 30 inch model will fit in the same space. You will want a model that offers an optional filler kit to fill in the 3 inches on both sides, so make sure the model you choose has that option. Thank you for checking with us.
Lisa from GE Appliances.

Hi Todd- This is Sue at GE Appliances. We are excited to hear of your interest in our Profile Series Microwave! The optional 27" BUILT-IN TRIM KIT JX7227DFBB is required for built-in installation. The cutout height requirement is 16 3/4". We suggest to view the Installation Instructions for cutout and clearance requirements at this link: https://www.myapstore.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40727.pdf- Thanks for checking with us!

Hello steve - this is Nancy at GE Appliances and I am happy to help you. The PEB7226DFBB can be built into the cabinet using one of the following trim kits: JX7227DFBB (for 27" cabinets) or the JX7230DFBB (for 30" cabinets). The cabinet trim kit required cutout dimensions are: 16-3/4" high x 25-1/2" wide. I hope this helps! Thanks for checking with us!

Hello Keith - this is Nancy at GE Appliances and I am happy to help you. Your local dealer is the best source for product availability in your area. They will be able to assist you with local availability and all feature information on our appliances. I hope this helps! Thanks for checking with us!