A:
IOGEAR says: Thank your for choosing IOGEAR . You would have to switch the default hot key to control . The GCS632U is an emulated KVM . The built in emulation is looking for a Basic 104 key wired keyboard. This process must be done with a basic wired keyboard . The hot key invocation sequence is as follows:
Press and hold the Numlock Key
Press and release the [-]
Release the Numlock Key
This must be done very fast. If done correctly the keyboard LEDS should flash alternately.
To switch the Scroll lock hot key to [CTRL][CTRL], then
Press and release [T]
Press and release [ENTER]
The keyboard LEDS should now stop flashing.
Note on 2 port KVM's you may not have to press Enter