this is plug n play, should be recognized under my computer. if its not, i suspect u have a bad drive. 2 obvious choices, plug into someone else computer and verify or return. very rare, but i have seen a bad cable before. you could try plugging it in and rebooting and see if it gets detected under startup.
fyi, 3.0 is backwards compatible in most cp's. will read 2.0 unless its a 3.0 port - the speeds are DRASTICALLY different. 3.0 ports are typically blue.
10 years, 2 months ago
by
Posted by:
pipeandwire
from
Chicago