Hello, per the Installation Instructions (link below): To supply the required 3 or 4 wire, single phase, 120/240 volt, 60 Hz., AC only electrical supply (or 3 or 4 wire, 120/208 volt electrical
supply, if specified on the serial/rating plate) on a separate 30-amp circuit, fused on both sides of the line. A time-delay fuse or circuit
breaker is recommended. Connect to an individual branch circuit.
http://bit.ly/2hAg9ZJ
8 years, 6 months ago
by
Posted by:
WhirlpoolTeam