LeAnne, sorry to hear that you have difficulty in register the VH621 to your DS6251-2 phone system. Please check if the register steps below have been fully followed. If still unable to register your headset, our CS agents at 1-800-595-9511 can help. Our CS opens from 9am to 5pm, Mon to Fri.
Here are the headset register steps:
1. Make sure the battery is properly installed in the
headset. The LED light on the headset flashes
slowly in red and blue to indicate the headset is
not registered.
2. Place the headset in the charger cradle and
allow it to charge for at least one hour before
beginning registration.
3. Remove the headset from the charger cradle.
4. On the telephone base of the cordless phone,
press and hold /HANDSET LOCATOR,
FIND HANDSET or FIND HS, until the
IN USE light turns on and the screen displays the
“Registering” message, and then release the button.
The LED light flashes quickly in red and blue.
• If your telephone base do not have the
/HANDSET LOCATOR, FIND HANDSET or
FIND HS button:
Press and hold the HOLD button until the screen displays
Registering... Please wait, then release the button.
It takes about 60 seconds to complete the registration process. Once
the headset is registered, The LED light turns red when the battery
is low and being charged, or turns purple when the battery is well
charged, or turns blue when the battery is fully charged.
If the registration fails, you hear the voice prompt "Not registered"
when you press the ON/OFF button on the headset, and the ON/
OFF button light on the headset alternates slowly in red and blue. Try
the registration process again.
4 years, 3 months ago
by
Posted by:
VTech Baby Monitors Team