When you are in live view, touch the three little dots on the upper right of the screen. Select "Settings", wait for the menu to load, then select the "Motion Detection" section. Select the button on the right (turn to on), Turn on the "Recording by motion detection" then select the "Active Area". From this point select where you want the motion to turn on the camera's recording. Select your sensitivity (this will take a while for you to figure out as its different for everyone), then go back to your previous screen and select "Apply" from the lower right button. Your motion will be set up to be recorded. There is no cloud feature for this camera, you should have a chip inserted (at least 32 GB and be sure its really fast). That is your only storage.