With 180W peak power handling, these JBL GX602 2-way coaxial car speakers utilize 6-1/2" polypropylene cones to project robust, full-bodied sound throughout your vehicle as you cruise. The 50Hz - 21kHz frequency response offers high-quality tones.
I needed to replace the (2) rear / behind the seats Sub woofers in my 2004 Chrysler Crossfire. This car comes with a factory Infinity (6) Speaker System, including (2) Tweeters, (2) Mid Range Speakers , and (2) Bass Woofers behind the seats. My (2) Bass Speakers had dry rotted, and needed to find replacements. Factory system handled 2 ohm speakers, with low wattage needed per channel, and very hard to find. Unfortunately you can no longer purchase these speakers from the Chrysler. Most speakers on the market are 4 ohm Speakers with a lot more power than I need. I spoke with one of the Techs at Best Buy, and he recommended that if I want to keep my current system, 4 ohms speakers would not give me the full sound that I want. The JBL GX602 were rated at 2.3 ohms, with about 60 watts continuous. I purchased them...and they were perfect. Perfect fit inside the factory speaker housing. Holes lined up perfectly, and was able to use the factory speaker harness. Easy connect; Red (positive), Black (negative)...that easy. No cutting, not modifying. Due to the factory Infinity having (2) Tweeters, (2) Mid Range Speakers and (2) Bass Range Speakers, the system has a built in Crossover. The JBL GX602 also has a range that will give me that bass, that I want to get back. This was an easy install, and a perfect match. Thanks for the tech at Best Buy for being straight up with me on the info and specs recommended, and Best Buy for carrying a great speaker. They were on sale too!!