Wiring info for "Insignia PC Case Fan - 120mm"
I plan to use this fan in a small RV to move air over the refrigerator coils in order to help cool them down on hot days. Can you tell me which two to the four wires are the power wires?
Thanks,
Rick Gibbons
Hey Rick,
This is EXACTLY what I did in my RV. I sealed off the roof vent from inside the RV using 1/2" plywood. Then I cut two holes in the plywood to mount the fans to ensure the fans pull the air out. As for the wires, there is no way to tell which wires just by looking at them. But only one black and one gray will work. So I cut the plug off and stripped about 1/2" off the sheath. Tried one black with each of the grays and nothing worked. Tried the other black and it worked with only one of the grays. Those were my two to use. I'm pretty sure the gray wire was the positive and the black was the negative. But try it both ways to make sure. I cut the other wires to about 1" and wrapped them with electrical tape.