Hey there, TDavis. Here are step by step instructions on how to properly replace the water filter. I hope this clears up any confusion. 1. Shut off the water supply line.
2. Turn the knob of the filter cartridge
counter clockwise 90 degrees (1/4
turn). The filter cartridge unlocks.
3. Pull out to remove the cartridge.
- If the water filter is severely
contaminated, the cartridge may not
be easy to remove. If that is the case,
use force to remove the cartridge.
- To prevent water leaks from the
filter opening, pull the cartridge
straight out while removing it.
4. Insert a new filter cartridge. Use only
Samsung-provided or approved filters.
Untitled-8 76 2019-06-12 2:31:47
English 77
Maintenance
5. Turn the cartridge knob clockwise to
lock into place.
6. Press and hold Filter Reset on the main
panel for 3 seconds to reset the life
cycle detector. The Filter Reset indicator
( ) turns off.
7. When you are done replacing the filter,
open the water valve and run water
through the dispenser for about 7
minutes. This is to remove impurities
and air from the water line. ^Lo