A:
Yes, these speakers will work. These speakers, like almost any other passive stereo speakers, have two ports on the back (see attached image), one red and one black. What you need to do is purchase some 16 or 18 gauge speaker wire. Cut a length of speaker wire, and strip the ends to about 1/4". These speakers have a screw tightening method, so you wrap the speaker wire around the terminal and twist the colored pieces down to secure the wire. Then connect the two wires to the back of your stereo in their corresponding outlets (they should be labeled front left, front right, center, surround left, surround right, etc.) depending on where you plan to use your speakers in your home stereo setup. These are very nice speakers and I highly recommend them for their value. Good luck, hope this helps!