A:
@ Ameribrit, YES"- Hope you have found your connection process, just in case i have a identical set up and purchase, my wifi connection was completed by the following: be sure your modem is a DSL unit if you have a telphone jack/ethernet for wire connection thats it, not cable, next connect your Toshiba to you Netgear router directly with a ethernet cord/cat5 yellow cord, should be supplied with modem purchase, follow the connect instruction to connect set up with modem by typing netgear.com in your browser, this will open up the set up page in your modem for connection with your netgear, you will type in your connection info from the back of your Linksys Router and your internet provider, IP) i.e. telephone company name,what ever information thats required is available from your telephone company such as what type of system your ( internet provider IP) is giving you, exsample: mine is a DYNAMIC system..the modem will set its self to the corresponding connection parameters. next connect your (router Linksys) to your modom with the same wire as previously connected if not supplied.BE SURE to put the wire in the correct port separate from any auxiliary ports, this is your connection from modem to router for wifi signal, not the 4 extra connect ports for internet access of additional equip. Disconnect your Toshiba and search available wifi for the wifi NAME you choose during set up, log in will require the pass word located on the bottom or side of your modem ID Tag. JD.